Zanussi ZOU 363 - Handbuch (Seite 31)

31
550 MIN
600
560 - 5
70
80÷100
Fig. 11
Fig. 12
Fig. 13
Building-in
To ensure correct operation of the built-in assembly, the kitchen
cabinet and the recess for the built-in appliance must have
suitable dimensions. When the appliance is fitted-in, there
must be no open spaces left and it must be closed on all
sides by the kitchen furniture to prevent the possibility of
inadvertently touching “live” (current carrying) parts of the
oven. All parts ensuring such a protection, including any
covering panel (for instance, if the appliance is installed at the
end or at the beginning of a kitchen counter) must be fastened
in such a way as to prevent removal of the same without the
aid of some tool. This appliance can be placed with its back
and with one side close to appliances or walls of higher
height. The other side, instead, must be placed close to
furniture or appliances, having the same height.
Overall oven dimensions (Fig. 11)
Building-in under a kitchen counter
The recess must have the dimensions shown in Fig. 12.
Before carrying out the building-in of the oven, connect it to
the hob (see corresponding chapter); then recess completely
the oven under the counter, open the oven door and secure
the oven to the kitchen cabinet.
Securing the oven to the cabinet (Fig. 13).
1. Fit the appliance into the cabinet recess.
2. Open the oven door and secure the oven to the kitchen
cabinet by placing the four distance holders (A) in the
holes provided in the oven frame and then inserting the
four wood screws (B).