Zanussi ZOU235X - Handbuch (Seite 38)

Electrolux
38
“End of cooking” function
With this function, you can set the oven to
switch off automatically when a programmed end of
cooking time is over. Place food in the oven, select
a cooking function and adjust the cooking
temperature. Press button repeatedly to select
the “End of cooking” function. The relevant pilot
lamp will start flashing. Then, proceed as
follows:
To set the End of cooking time:
1. Press button “ ” or “ ”.
2. After the setting is carried out, wait for 5 se-
conds: the “End of cooking” pilot lamp will
come on and the display will revert to the time
of day.
3. When cooking time is over, the oven will be
switched off automatically and an acoustic
alarm will be heard, and the pilot lamp will start
flashing. Turn the oven function and the ther-
mostat control knob to zero.
To switch off the acoustic alarm, press any
button. NOTE: turning the acoustic alarm off will
reset the oven to manual, and if the oven
function and the thermostat knobs are not set to
zero the oven will start to heat again.
To cancel the End of cooking time:
1. Press button
repeatedly to select the “End
of cooking” function. The relevant pilot lamp
will flash and the display will show the
programmed End of cooking time.
2. Press button “ ” until the display shows the
current time of day. The programmer will beep
and the pilot lamp will go out.