Zanussi ZOU235X - Handbuch (Seite 49)

Electrolux
49
Fig. 8
To perform this operation correctly, pro-
ceed as follows:
a) the decorated internal pane with a frame on the
4 sides must be reassembled so that the screen-
printing is facing outwards. The side of the pane
of glass is correct if you do not feel any roughness
near the screen printing when you pass your
fingers over the surface.
The internal pane of glass must be put back into the
right seats as shown in Fig. 8.
After the panes of glass have been reassembled in
the oven door, perform the procedure described in
point 8. in reverse to ensure they are locked.
Do not clean the oven door when it is
still hot, as the glass could shatter. If
scratches or deep cracks are noted on
the surface of the glass, contact the
authorised Assistance Centre for re-
placing the glass.
Models in stainless steel or aluminium:
It is advisable to clean the oven door and
control panel in stainless steel or aluminium
only with a moist sponge, carefully drying
with a soft cloth after cleaning. Never use
steel wool, acids or abrasive products as
they can damage the surface.
How to clean the oven door seal
A rubber seal around the oven opening guarantees
correct operation.
Check the condition of this seal peri-
odically. If it has to be cleaned, do not
use abrasive objects or substances. If
you notice that the seal is damaged,
contact your local service centre and
do not use the oven until it has been
repaired.
)