Xoro HSD 8405 - Handbuch (Seite 74)

24 HSD 8405
Engl
ish
PLAYBACK
With the V.MODE button you can change the video output without using the setup settings.
The sequence is:
RGB —> CVBS —> YUV —> YUV PSCAN —> RGB
By using a SCART connection the picture quality changes slightly but visible during pressing
the V.MODE button.
Important Note by using 3-wire component cable with progressive Scan (YUV PSCAN
or Y Pb Pr):
If you uses 576p with an 3-wire component cable and you press the V.MODE button the
picture disappears from the screen. Don’t worry about it, because you can restore the pic-
ture by pressing the V.MODE button more times. Please wait several seconds after one
pressing the button before you press again the V.MODE button. After three-times pressing a
picture shall be appear on the screen.
Important Note by using 3-wire component cable with progressive Scan (YUV or Y Cb
Cr):
Your TV set doesn’t support PSCAN!!!
If you uses 576i with an 3-wire component cable and you press the V.MODE button the
picture disappears from the screen. Don’t worry about it, because you can restore the pic-
ture by pressing the V.MODE button more times. Please wait several seconds after one
pressing the button before you press again the V.MODE button. After three-times pressing a
picture shall be appear on the screen.
Notes:
•
By using a HDMI connection the V.MODE button has no influence on the picture
quality.
• In case of no picture on the screen, please control the cable connection between
HSD 8405 and the TV set. If all cables are connected successful, please install an
CVBS video connection between DVD-Player and TV. Change by the TV set to the
AV or CVBS input and the picture shall be appear on the screen. Than you can set
the video output of the DVD-Player until your current connection has a picture again.
You can mute the player by pressing the MUTE button. The sound switches off. A sign will
displayed on the screen. To activate the sound, press again the MUTE button.
Playback control is available for Video CD (VCD) version 2.0 disc formats. PBC allows you
to interact with the system via menus, search functions, or other typical computer-like opera-
tions. Moreover, still pictures of high resolution can be played if they are included in the disc.
Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio CDs.
Please press the PBC button for activating or deactivating the PBC function by VCD.
Change Video putput
Mute
PBC