Xoro HSD 8405 - Handbuch (Seite 85)

HSD 8405 35
Engl
ish
Test Tone
With the test tone you can check the wire connection to the speaker. The Player produces
for every speaker a test tone and displays on the screen on which speaker is the test tone
available.
Note:
The Test Tone can be uses only when the menu DOWNMIX is set by 5.1CH.
Post DRC
The Post DRC setting can help to adjust the sound output by very loud noises (explosion,
music) and very quiet speaking. The noises will be reduce and the speaking will be in-
creases.
SPDIF Setup
The setting is responsible for the digital audio
output like Dolby Digital or DTS by the coaxial
or optical audio output to the AV Receiver or
AV Amplifier. The options are:
SPDIF Output
SPDIF OFF:
Deactivates the digital output
SPDIF/PCM: Output of digital audio in the PCM format
SPDIF/RAW: Output of all kind of digital audio formats.
LPCM Output
During the development by High Definition Video was also developed the high quality Audio.
Since a couple of years the standard format is LPCM with a sampling rate of 192 kHz and a
sample size of 24 bit.
For compatibility reasons the player is able to educe the sampling rate, because not all and
specially older Digital-Analogue-Converter) can not handle 192 kHz.
The options by LPCM output are 96k and 48k.
Note:
The option is only than active, when you uses PCM output in the SPDIF settings.
SETUP
Audio Setup Page