Xoro HTC 2242 HD - Handbuch (Seite 89)

ENG19
Engl
ish
If you have chosen not to use the pre programmed channel list, there will appear a menu for dish
set up on the screen.
You will have to informed of following points to make a successful satellite channel scanning.
•
Which Satellite does your antenna orient?
If you have more than one antenna or one antenna with more than one LNB, you will have to know
which type of switch (Toneburst or DISEqC) is employed and to which port is each Antenna LNB
connected.
Please ask the installer, if any of the parameter is not known. If you live in a rental house or
apartment, please ask the renter.
Example:
The most satellite antenna orients satellite ASTRAS 19.2° and has a “universal” or “Digital” LNB.
We recommend the pre programmed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as
following:
Satellite:
019.2E Astra 1H.
LNB Type: 09750/10600
LNB Voltage: On
22KHz: AUTO
Tonebust: None
DiSEqC 1.0: None
DiSEqC 1.1: None
Motor: None
On the left side of the screen there is a list of satellites
for
which the TV is pre programmed.
Settings of the chosen satellite is displayed on the right side. The Transponder is listed in the
middle.
Process:
•
Select the first satellite to be set up with
▲ / ▼.
•
Press the OK button. The chosen satellite is marked with a hook, comfirming this satellite
will be considered in the coming channel scan.
•
Press the button ► twice to access to right side.
•
Select the option with ▲ / ▼ and change the parameter with ◄/ ►
•
Press
◄ to get back to the left side and EXIT after the settings having been done.
•
If your satellite system can receive signals from a number of satellites, select a further
satellite with
▲ / ▼. Press OK and define the parameter on the right side.
•
Repeat this procedure for all satellites available.
Initial Installation