Xoro HTC 2242 HD - Handbuch (Seite 92)

ENG22
Engl
ish
Connection
SCART Input
Audio– and Video signals from a VCR or a setop box can be transmitted by
SCART. Please connect a SCART cable with the SCART input on the HTC TV set
and with the SCART output on the VCR or setop box.
Press the INPUT button, choose „SCART“ in the popup window and confirm by the OK button.
HDMI
HDMI transmits digital audio and video signals.
Supported resolution:480i, 480p, 576i, 576p, 720p, 1080i, 1080p (24Hz, 50Hz, 60Hz)
Supported audio formats: PCM (stereo)
Please press the INPUT button, choose „HDMI” in the popup window and confirm by the OK button.
Y Pb Pr
You can connect further multimedia terminals with the TV via YPbPr. Plug one end of the video
adapter cable into the YPbPr jack on the TV, and the other ends (3-wire video components) to the
RCA jack of your multimedia device.
Please pay attention to the coloured coding of the cable, inputs jacks (adapter cable) and the video
output jacks (source):
•
“Y” with the green wire or RCA plug
•
“Pb” with the blue wire or RCA plug
•
“Pr” with the red wire or RCA plug
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. You can take the AV IN port for the sound.
Please press the INPUT button, choose „YPbPr“ on the popup window and confirm by the OK button.
AV IN
You can connect further multimedia terminals with the TV via AV IN.
Please press the INPUT button, choose „AV IN“ on the popup window and confirm with OK.
VGA
You can use the TV set as a PC monitor by using the VGA interface. Please connect a VGA cable
with the VGA input of the TV set and with the PC.
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. Please connect the white and red wire of the 2-pin
component cable with the AUDIO OUT (source) and the stereo jack with the “PC IN” plug of the TV
set.