Care and cleaning – Zanussi ZOB35631XA Benutzerhandbuch

Seite 14

Advertising
background image

TYPE OF DISH

Shelf position

Temperature [°C]

Time [hr]

1 level

2 levels

Pears

3

1/4

60 - 70

6 - 9

Care and cleaning

Warning! Refer to the Safety chapters.

• Clean the front of the appliance with a soft

cloth with warm water and a cleaning agent.

• To clean metal surfaces use a usual cleaning

agent.

• Clean the oven interior after each use. Then

you can remove dirt more easily and it does
not burn on.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all oven accessories after each use

and let them dry. Use a soft cloth with warm
water and a cleaning agent.

• If you have nonstick accessories, do not

clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can de-
stroy nonstick coating.

Stainless steel or aluminium applian-
ces:

Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materi-
als, as they can cause damage to the oven sur-
face. Clean the oven control panel with the
same precautions.

Cleaning the door gasket

• Regularly do a check of the door gasket. The

door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact the Service
Centre.

• To clean the door gasket, refer to the general

information about cleaning.

Shelf supports

You can remove the shelf supports to clean the
side walls.

Removing the shelf supports

1

Pull the front of

the shelf support
away from the side
wall.

2

1

2

Pull the rear end

of the shelf support
away from the side
wall and remove it.

Installing the shelf supports

Install the shelf supports in the opposite se-
quence.

The rounded ends of the shelf supports
must point to the front.

Aqua cleaning

The Aqua cleaning procedure uses steam to
help remove remaining fat and food particles
from the oven.

1. Put 300 ml of water into the Aqua cleaning

container at the bottom of the oven.

2. Set the oven function

.

3. Set the temperature to 90 °C.

4. Let the appliance operate for 30 minutes.

5. Deactivate the appliance and let it cool

down.

6. When the appliance is cool, clean the inner

surfaces of the oven with a cloth.

Warning! Make sure that the appliance is
cool before you touch it. There is a risk of

burns.

Oven lamp

14

www.zanussi.com

Advertising