Xoro HRS 8525 - Handbuch (Seite 52)

ENG 14 HRS 8525
Engl
ish
Connection
General information
•
Assure that the device is switched off and
unplugged.
• Read the manual of your TV and attend
to the safety instructions.
• Connect the power cable at last with a
electronic socket.
The HRS8525 could be connected either through HDMI or scart to TV. Please connect the receiver
through HDMI if possible. The TV could only display the signal in high definition quality through HDMI
out put.
HDMI:
Connect the HDMI output of HRS8525 to a free HDMI input of the TV. Please read
the manual of your TV to select the HDMI input. Generally the TV does not
switch automatically to the HDMI input upon connection. A HDMI cable is
necessary for this connection. It is not included in the delivery of the receiver.
SCART:
Connect the TV SCART output of HRS8525 to a free SCART input of the TV. Please
read the manual of your TV to select the SCART input. Generally the TV does not
switch automatically to the SCART input upon connection. A SCART cable is nece
ssary for this connection. It is not included in the delivery of the receiver.
Notes:
•
The HRS8525 is designed for TV with 16:9 as aspect ratio. Please refer to the page 32 how
to set a TV with aspect ratio 4:3 to fit the receiver. It is also described there how to change
the HDMI resolution and signal type under the SCART connection.
• Please employ high quality cables. Low quality cables ( especially up 1,5 m length) might
cause picture failure or make an image transmission impossible. Poorly shielded cables might
result in “double image” or disturbing sound.
Connecting to the TV