Xoro HRK 8750 CI+ (Kabel-Receiver DVB-C) - Handbuch (Seite 61)

ENG-15
Engl
ish
Connection
You have the possibility of transmitting the digital audio signal to a decoder or amplifier, using the
coaxial output.
1.
Switch off and unplug all devices
2. Connect the receiver and the TV with a SCART or HDMI cable
3. Connect the HRK 8750 CI+ to the decoder or amplifier (coaxial cable)
4. Switch on all devices
5. Activate the coaxial input at your decoder or amplifier
Note:
x
The Cables are not part of the accessories
x
There are just a few channels which use digital audio.
x
You can gain information about the audio signal by pressing the AUDIO key on your
remote control
Connect the chinch cable to the red (R) and white (L) connectors of the HRK 8750 CI+ and to the
connectors of the amplifier/sound system which is mostly labelled as “AUX IN” or “Stereo IN”. Switch
on the amplifier / sound system and choose the appropriate input mode.
To external decoder or amplifier
Stereo connection to a amplifier or soundsystem (Stereo)