Xoro HRK 8750 CI+ (Kabel-Receiver DVB-C) - Handbuch (Seite 63)

ENG-17
Engl
ish
Connection
7. If the CAM module is seated correctly, then you
can not push further.
8. After properly inserting the CAM module
disengage the eject button. CAM module and key
are on the same level.
Notes:
1.
Follow the instructions of the manufacturer of
CAM module (Common Interface) and
subscription card.
2. Carefully slide the module into the slot.
Ejection of the module
Press the eject button next to the CAM module up to the attack. The CAM module is pushed a little
bit. Now you can pull the CAM module out of the bay.
Connect the USB flash drive carefully on to the USB port. In
general the label should show the USB stick to the top.
Remove the USB stick only when you are back in Live program,
otherwise the drive could be damaged.
Notes:
1.
Due to legal requirements of CE-conformity, the customer is asked to only connect USB-
Sticks to the USB port.
2. The USB port can be supported up to 16 GB flash memory size. Due to the many different
USB-Sticks and the built-in electronic components a support of all USB-Sticks can not be
guaranteed.
3. Please format the USB-Sticks only with FAT 32 or NTFS file system. Other file systems are
not supported and can not be recognized by the USB port.
4. Save all data from the USB memory before you connect to the device.
5. Max. supported capacity of USB Storage devices is 320GB. Devices with higher capacity
may work fine, but it can not be guarantied under all circumstances .
Common Interface
USB port