Xoro HRS 3400 - Handbuch (Seite 73)

HRS 3400 21
Engl
ish
First Time Installation
5. Using more than two satellite by DiSEqC 1.2 / USALS
DiSEqC 1.2 provides additional control of three plants by DiSEqC commands, via a single
coaxial cable. Of the motor's staff was also a record producer (rod USALS) defined which is
to find the satellite position is particularly simple. With the appropriate receiver is sufficient to
enter the geographical position and the satellites are found automatically - provided that the
curved path of the rotary engine has been correctly set mechanically.
Select the option LNB DiSEqC switch setting
1.2/USALS.
You now have two ways to make the set-
tings, either via a DiSEqC 1.2 or USALS.
DiSEqC 1.2
Choose from the satellites, you can achieve
with your motorized satellite dish.
Press the BLUE button and you can influence
the search and found the TV to where you
are either with scanning Mod. (Scan Mode) a
standard search or perform a "blind" search
(explained in detail on page 17).
Now, all search parameters are set and the scan can run. Press the OK button and the scan
begins.
All received TV and radio stations are displayed in the two lists. After the scan, the TV and
radio stations are stored in the two lists and the unit goes into the live image of the first TV
station.
USALS
Define the search parameters by the options Set Limit, Set Area and Set LNB
Set Limit
Definition of angle of rotation in west and east direction
Set Area Define the area where the dish are placed
Set LNB Choose the parameters of the LNB
My Dish—Using DiSEqC 1.2/USALS