Burkert Type 8709 - Handbuch (Seite 15)

56
A detailed description and precise listing of the
operation procedure of the “Mass Flow Com-
municator” software can be found in the software
documentation.
Download the software from: www.burkert.com
spare parts 11.2.
For the types 8708, 8718, 8709 and 8719 there are dif-
ferent spare part sets according to the seal material.
Seal material *) Designation Order number
EPDM, DA Seal set with
EPDM filter 208 579
FKM Seal set with
FKM filter 208 580
FFKM Seal set with
FFKM filter 208 582
*) Observe the specifications on the rating
plate for the seal material!
english 57
shuTdoWn 12.
safety instructions 12.1.
Danger!
Risk of injury from high pressure in the equipment!
Before loosening the lines and valves, turn off the •
pressure and vent the lines.
Danger from escaping operating fluid!
If contact is made with the operating fluid and its reaction
products, including in vapor form (touching, inhaling), there
is an acute risk of injury.
Observe applicable accident prevention and safety •
regulations for the operating fluids used.
Risk of injury due to electrical shock!
Before removing covers, • switch off the power supply and
secure to prevent reactivation!
Observe applicable accident prevention and safety
•
regulations for electrical equipment!
english
58
Warning!
Risk of injury from improper removal!
Removal may be carried out by authorized technicians •
only and with the appropriate tools!
removal of the lfc / lfm 12.2.
Procedure:
Relieve system pressure.
→
Switch off power supply.
→
Remove electrical connections.
→
Remove fluid connections.
→
Empty LFC / LFM.
→
english 59
PackaGinG, sToraGe, 13.
TransPorT
Packing, Transporting 13.1.
note!
Transport damage!
Inadequately protected equipment may be damaged
during transport.
Remove all cables, connections, separate filters and •
installation material.
Clean and empty contaminated devices.
•
Protect fluid connections from damage by fitting pro- •
tective caps and seal.
Pack device in two suitable and sealable protective
•
film bags.
During transportation protect the device against wet
•
and dirt in shock-resistant packaging.
Avoid exceeding or dropping below the allowable
•
storage temperature.
english
Type 8708, 8709, 8718, 8719