WolfVision VZ-8plus 4 User Manual - Handbuch (Seite 16)

15
HDMI IN - external input
A computer can be connected to the HDMI IN (#18) of the Visualizer.
By
the Visualizer displays the signal from the external input to the
audience. To switch back to the live image of the Visualizer use the EXTERN key on the camera head
or the VZ key on the remote control.
The Visualizer has a built-in A/D-converter in order to digitize the analog RGB signal from the computer and
output it on the RGB and DVI outputs in the selected signal format.
Preferred resolution is: 1080p (1920x1080@60Hz)
Supported resolutions from VGA (640x480@60Hz) to with several
resolutions and refresh rates in this range.
Following data are provided:
Plug & Play Monitor VESA DDC
Monitor name: "WolfVision"
Video Input Definition: digital signal
Vertical range limits: 50Hz - 60Hz
Horizontal range limits: 20kHz - 75kHz
Maximum pixel clock: 170MHz
Gamma: 2.2
Preferred resolution: 1080p (1920x1080) @60Hz
pressing the EXTERN key (#36 or #47)
(#47)
(#29)
WUXGA (1920x1200@60Hz)
HDMI Content Protection - HDCP
The Visualizer does not support HDCP (High-bandwidth Digital Content Protection).
Encrypted signals on the HDMI IN will be blocked and the Visualizer will output just a black image.
The proprietary HDCP technology is used on protected content like Hi-Definition Hollywood movies and
Pay-per-view transmissions and will not affect non-protected content.
It is not allowed to bypass the security system by law.
Copyright owner is Digital Millennium Copyright Act (DMCA).
19-pin HDMI
connector female
(front side, unit)
19 1
18 2
1 - T.M.D.S. Data2+
2 - T.M.D.S. Data2 8 - T.M.D.S. Data0 Shield 15 - SCL (I²C Serial Data Line for DDC)
Shield 9 - T.M.D.S. Data0- 16 - SDA (I²C Data Line for DDC)
3 - T.M.D.S. Data2- 10 - T.M.D.S. Clock+ 17 - DDC Ground
4 - T.M.D.S. Data1+ 11 - T.M.D.S. Clock Shield 18 - DC+5V (max. 50mA)
5 - T.M.D.S. Data1 Shield 12 - T.M.D.S. Clock 19 - Hot Plug detect
6 - T.M.D.S. Data1- 13 - Reserved
7 - T.M.D.S. Data0+ 14 - Reserved
CEC (Consumer Electronic Control), ARC (Audio Return Channel) and HEC (HDMI Ethernet Channel) are
not supported.