WolfVision VZ-8plus 4 User Manual - Handbuch (Seite 6)

5
#23 MENU key
Pressing MENU key activates the on-screen menu (see page 16).
#24 HELP/RESET key for on-screen menu (double function of MEMORY key No. 7)
While you are in the on-screen menu you can activate the on-screen help by pressing the HELP key.
Pressing this key for 2 seconds resets the selected menu item (see page 16).
#25 MENU NAVIGATION keys (double function of MEMORY keys No. 2, 4, 6 and 8)
For navigating through the on-screen menu (see page 16).
#26 PiP key
For activating the Picture in Picture mode for Live to Freeze comparison (see page 12).
#27 PRESET keys (programmable settings)
For storing a preset, press one of the PRESET keys for more than 2 seconds. For recalling a preset, press
the PRESET key quickly (see page 9).
#28 MEM key
For displaying pictures of the internal memory (see page 11).
#29 VZ key
For displaying the live image of the camera (see page 11).
#30 AUTO FOCUS (AF) key
Pressing this key activates the Auto Focus (see page 9).
#31 Manual FOCUS keys
For focusing the picture (see page 9).
#32 LASER POINTER indication LED
Indicates active Laser LED.
#33 LASER POINTER key
Important: Do not stare directly into the laser beam. This is hazardous for your eyes!
#34 ZOOM keys
Using the ZOOM keys also switches auto iris on again.
#35 USB key
For displaying pictures of the USB memory (see page 11).
#36 EXT key
Shows the signal of the external input, use the VZ key to display the live image again (see page 15).
#37 SNAPSHOT key
Pressing this key activates the SNAPSHOT function (see page 11).
#38 FREEZE key
Freezes the current image.
#39 MEMORY keys 1 - 9
For saving and recalling pictures of the internal memory (see page 10).
#40 ENTER key (double function of MEMORY key No. 5)
Same function as the right Navigation key (MEMORY key No. 6) (see page 16).
#41 Manual EXPOSURE keys (brightness adjustment)
When the EXPOSURE keys are pressed, the Visualizer changes the image brightness (see page 9).
For specialists: The behaviour of exposure can be changed in the on-screen menu (see page 16).
#42 POWER key
Pressing this key switches the unit on and off.
When switching on the unit, the Visualizer runs the power-on preset.
Keys on the IR-Remote Control