WolfVision VZ-C3D Installation - Handbuch (Seite 12)

Dismantling of the Visualizer
11
Should it be required to dismantle the Ceiling Visualizer due to re-location or after sales service, please
follow the drawings below.
Please take into consideration the weight of the unit (5.2 kg / 11.5 lbs) when detaching it from the
ceiling.
Push the cable cover carefully upwards and disconnect all cables from the Visualizer. The cable cover is
secured to the Visualizer by a rope to prevent it dropping down.
Loosen all three hex nuts at the ceiling mount to release the Visualizer (fig.4).
Turn the Visualizer clockwise to loosen it from the ceiling mount (fig.5) and remove it from the ceiling mount.
Prevent dropping down of the unit!
When needed, loosen all three hex nuts from the steel anchors at the ceiling mount to remove the mount.
fig.4
fig.6
fig.5
to release
Note: cable cover is not shown in the drawings to improve readability.
concrete