PrehKeyTec MCI TouchKey - Handbuch (Seite 3)

PrehKeyTec GmbH MCI_TouchKey_Manual_V15.doc - 2011-02-09 Page 3/10
1 Instruction
1.1 General Notes
Congratulations on your purchase of the MCI TouchKey. This product manual is only valid for this keyboard. Should you encounter any
problems or issues configuring this MCI TouchKey please contact your dealer for further advice.
You can find the latest programming and driver software, as well as detailed documentation on our support page:
H
http://support.prehkeytec.com
H
All PrehKeyTec products undergo a continuous improvement process. For this reason, technical modifications may be made without notice.
We would like to point out that improper handling, storage, actions and/or modifications can lead to malfunctions and damage during use. If
you modify our product as the end user, we are no way responsible for nay warranties or liability, except you are in possession of an
express, written release for your case of operation.
This applies especially to unprofessional repair and maintenance work.
Any claims of damages against PrehKeyTec, regardless of the legal reason, are excluded if we are not responsible for the intent or gross
negligence. The above limitation does not apply to claims for damages resulting from product liability laws.
1.2 Characteristics of the MCI TouchKey
The MCI TouchKey is characterized especially by its ergonomic and compact design. It unites two devices, a keyboard and the TouchKey
with a tactile feedback for the User.
The MCI TouchKey possesses the following characteristics:
•
Multiple user defined layouts with Buttons, Graphics and Text
• The Programming is done using the TouchKey Programmer.
•
The programming is based on XML files, which can be modified during use.
• There is a programmable keyboard part for fast data entry.
•
Layout switching using the TouchKey Buttons or the Keyboard keys.
•
Single USB interface and no external power supply needed.
• Use of many TouchKey devices on a single PC.
• Remote
programming.
Depending on the housing model, the TouchKey can be built to incorporate the following modules:
•
Magnetic Stripe Reader (MSR)
•
Key Lock (KL)
The keyboard part of the MCI TouchKey offers 42 programmable key positions. These keys and optional modules MSR/Keylock are
programmed using the WinProgrammer software.
The TouchKey module on the left side is configured by a set of XML definition files – created using the TouchKey Programmer. By default
also here a grid of 42 programmable positions can be assigned for each layout.
All required software is available in the support section of our Website:
H
http://support.prehkeytec.com
H
Also additional documentation can be found here:
• A flash animation helps getting started with the TouchKey Programmer.
•
Detailed information about the TouchKey is put together in the "Technical Documentation TouchKey".