Electrolux EOR5821BAX - Handbuch (Seite 16)

Touch or to change the letter.
Press OK.
6. Touch or to move the cursor
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
7. Press and hold OK to save.
Useful information:
• You can overwrite a memory position.
When the display shows the first free
memory position, touch
or and
press OK to overwrite an existing pro-
gramme.
• You can change the name of a pro-
gramme in the menu Edit Programme
Name .
Activating the programme
1. Activate the appliance.
2. Select the Favourite Programme
menu. Press OK to confirm.
3. Select your favourite programme
name. Press OK to confirm.
Press to go to Favourite Programme
directly.
10.2 Function Lock
The Function Lock prevents an accidental
change of the heating function. You can
activate the Function Lock only when the
appliance operates.
Activating the Function Lock :
1. Activate the appliance.
2. Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock.
4. Press OK to confirm.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked and
the symbol of a key comes on in
the display.
Deactivating the Function Lock :
1. Press . The display shows a mes-
sage.
2. Press and then OK to confirm.
10.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance .
Activating and deactivating the Child
Lock function:
1. Activate the appliance.
2.
Touch and at the same time
until the display shows a message.
If the appliance has the Pyrolytic
cleaning function and the function
operates, the door is locked.
A message comes on in the dis-
play when you touch a sensor
field.
To unlock the appliance, touch and
at the same time again until the display
shows a message.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Press again and again until the
display shows Duration .
4. Set the time.
5. Press again and again until the
display shows SET + GO .
6. Press OK to confirm.
To start SET + GO , press any sensor field
(except for
). The set heating function
starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
16 www.electrolux.com