SIGMA ROX 9.0 - Handbuch (Seite 61)

62 www.sigmasport.com
! Die ersten 5 mm abschneiden ! ! Die ersten 5 mm abschneiden !
6 usinG the siGMa rOX 9.0
In this chapter we explain all the
functionalities of the SIGMA ROX 9.0
6.1 FavOrites a anD B
The favorites A and B are two sections where
you can program the functions that are most
important to you. Both favorites come with
certain preset functions, but these can be
changed at any time. A total of 10 functions
can be stored in each of the two favorites. This means you have up to 15 functions
(speed, current altitude, current pulse,
current cadence and 10 functions from the
favorites) that you can easily access during
the ride.
6 usinG the siGMa rOX 9.0
6.2 lOGBOOk FunctiOns
The SIGMA ROX 9.0 is equipped with a
separate logbook. You can use the logbook to
store your own trips and most importantly, transfer them to your PC. Thanks to the
SIGMA SPORT
® analysis software, you can
evaluate and edit every trip stored.
6.2.1 save interval
The SIGMA ROX 9.0 saves the speed, heart
rate and altitude at certain save intervals. In
order to adjust the memory capacity to the
trip, you can set the save interval times
yourself: 5 sec., 10 sec., 20 sec., and 30 sec.
The longer the time interval, the bigger the
storage space. The remaining memory time
is next to the time interval for information
purposes.
The maximum memory times, depending on
the save interval, are as follows:
5 seconds
approx. 13 hours
10 seconds approx. 26 hours
20 seconds approx. 52 hours
30 seconds approx. 78 hours
All figures are based on a single trip and are
estimations.
note: Due to memory capacity, cadence
values are not stored in the data logbook.
so that you can ride worry-free.