SIGMA ROX 9.0 - Handbuch (Seite 72)

! Die ersten 5 mm abschneiden !
73
GB/
usa
rOX 9.0
! Die ersten 5 mm abschneiden !
8 Pc interFace/siGMa Data center
1. Before installation, you should close all
applications that are running.
2. Place the installation CD in your CD drive.
3. Installation starts automatically.
Alternatively, select your CD drive and
start “setup.exe” manually.
4. Follow the installation instructions on the
screen.
8.3 installinG the DOckinG statiOn
note: Before connecting the docking station
to your PC, you must have installed the
software supplied. See also Section 8.2
“Installing the SIGMA DATA CENTER”.
1. Connect the docking station supplied to
a free USB port on your PC.
2. Your operating system will automatically
detect new hardware and install the
appropriate driver.
3. Should automatic installation fail, you can
also install the driver manually using your
Device manager. You will find the driver file
on the SIGMA installation CD in the
“Drivers” directory.
4. Windows warns you about an uncertified
driver. Please confirm this window by
clicking “Continue installation”.
5. Start the analysis software and click on
the “connect” button to integrate your
SIGMA ROX.
6. Twist your SIGMA ROX onto the docking
station. The software recognises your
appliance automatically and switches to
“connected” mode (green light on the
docking station).
7. Follow the instructions in the software.
8.2 installinG the siGMa Data center
5. Adobe “Air Framework” is required to
perform the SIGMA DATA CENTER. This is
automatically installed at the same time.
Please follow the instructions for Adobe
“Air Installation”.
6. Once the installation has finished, you can
remove the CD.
You can find further information about the
“SIGMA DATA CENTER” functions in the
program’s online help section.