Satellite system setup, Editing channels – Samsung LE40C679M1S Benutzerhandbuch
Seite 13
13
English
03
Basic Featur
es
Satellite System Setup
The PIN input screen appears. Enter your 4 digit PIN number.
Satellite System Setup is available when Antenna is set to
Satellite. Before running Auto Store, set Satellite System
Setup. Then channel scan is run normally.
Satellite Selection
■
: You can choose the satellites for
this TV.
LNB Power (Off / On)
■
: Enables or disables the power
supply for the LNB.
LNB Settings
■
: Configures the outdoor equipment.
Satellite: Selects the satellite for receiving digital
broadcasts.
Transponder: Selects a transponder from the list or
adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected
LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a
lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a
higher frequency.
Tone 22 khz (Off / On / Auto): Selects the Tone 22
kHz depending on the LNB type. For a universal LNB it
should be Auto.
Signal Quality: Display the current status of
broadcasting signal.
Positioner Settings
■
: Configures the antenna positioner.
Positioner (Off / On): Enables or disables the positioned
control.
Positioner Type (USALS / DiSEqC 1.2): Sets
the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).
My Longitude
–
: Sets the longitude for my location.
My Latitude
–
: Sets the latitude for my location.
Satellite Longitude Settings
–
: Sets the longitude of
user defined satellites.
User Mode: Sets the position of satellite antenna
according to each satellite. If you store the current
position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed,
the satellite antenna can be moved to pre-populated
position.
Satellite
–
: Selects the satellite to set the position for.
Transponder:
–
Selects a transponder from the list for
signal reception.
Moving Mode:
–
Selects the movement mode between
discrete and continuous movement.
Step Size:
–
Adjusts the step size degrees for the
antenna rotation. Step Size is available when Moving
Mode is set to Step.
Go to Stored Position
–
: Rotates the antenna to the
stored satellite position.
Antenna Position
–
: Adjusts and stores the antenna
position for the selected satellite.
Store Current Position
–
: Stores current position as
the selected positioner limit.
Signal Quality
–
: Display the current status of
broadcasting signal.
Installer Mode: Sets limits to the scope of movement
of satellite antenna or reset the position. Generally,
installation guide uses this function.
Limit Position (East / West)
–
: Selects the direction of
the positioner Limit.
Antenna Position:
–
Adjusts and stores the antenna
position for the selected satellite.
Store Current Position:
–
Stores the current position
as the selected positioner Limit.
Go to Zero
–
: Moves the antenna to the reference
position.
Reset Positioner Limit
–
: Allows the antenna to rotate
over the full arc.
Reset All Setting (OK / Cancel)
■
: All satellite settings will
be reset to the initial values.
¦
Editing channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the
TOOLS
button.
2. Edit the channel name or number using the Edit
Channel Name or Edit Channel Number menu.
Edit Channel Name
■
(analogue channels only): Assign
your own channel name.
Edit
■
Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
BN68-02631K_Eng.indb 13
2010-03-03 �� 8:44:19