Basic features, Ⱥ - ȼ, Picture options – Samsung LE40C679M1S Benutzerhandbuch

Seite 16

Advertising
background image

16

English

Basic Features

Picture Options

In PC mode, you can only make changes to the

Colour

Tone, Size, Digital Noise Filter and Auto Protection
Time.

Picture Options

Colour Tone

: Normal

Size

: Auto Wide

Screen Mode

: 16:9

Digital Noise Filter

: Auto

MPEG Nosie Filter

: Auto

HdMI Black level

: Normal

Film Mode

: Off

U Move E Enter R return

Colour Tone (Cool / Normal / Warm1 / Warm2)

Warm1

or Warm2 will be deactivated when the

picture mode is Dynamic.
Settings can be adjusted and stored for each

external device connected to an input on the TV.

Size

: Your cable box/satellite receiver

may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.

Adjusts the Position by using

▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.

Adjusts the Position or Size by using

▲, ▼ button.

4:3 : The default setting for a movie or normal
broadcasting.

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.

NOTE

After selecting

x

Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the

◄ or ► button to select Position.

2. Press the ENTERE button.
3. Press the

▲, ▼, ◄ or ► button to move the

picture.

Depending on the input source, the picture size

x

options may vary.

The available items may differ depending on the

x

selected mode.
In PC mode, only

x

16:9 and 4:3 modes can be

adjusted.
Settings can be adjusted and stored for each

x

external device connected to an input of the TV.
If you use the

x

Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.

Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size.
Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one
of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.

Only available for analogue channels.

When bar is green, you are receiving the best

possible signal.

MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide an improved
picture quality.

Disabled under PC mode.

HDMI Black Level (Normal / Low)

: Selects the black

level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

Film Mode (Off / Auto1 / Auto2)

: Sets the TV to

automatically sense and process film signals from all
sources and adjust the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

100Hz Motion Plus (Off / Clear / Standard / Smooth /

Custom / Demo) : Removes drag from fast scenes with
a lot of movement to provide a clearer picture.

If you enable

100Hz Motion Plus, noise may

appear on the screen. If this occurs, set 100Hz
Motion Plus to Off.

Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
Auto Protection Time (2 hours / 4 hours / 8 hours

/ 10 hours / Off) : If the same image remains on the
screen, Auto Screen Burn Protector will work.

Ⱥ-Ȼ

@

TV

BN68-02631K_Eng.indb 16

2010-03-03 �� 8:44:19

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: