Nilfisk-ALTO NEPTUNE 5 SB FA Benutzerhandbuch

Seite 16

Advertising
background image

14

1)

Options / model variants

NEPTUNE 5 SB FA

5.2 Some typical cleaning tasks
5.2.1 Agriculture

Task

Accessories

Method

Stables
Pig Pens, Sties

Cleaning of walls,
floors and equip-
ment

Disinfectant

Chemical Foam Injec-
tors
Foam lance
Powerspeed lance
Floor Cleaner

Detergents
Universal
Alkafoam

Disinfectant
DES 3000

1. Soaking – apply foam to all surfaces (bottom to top)

and wait for approx. 30 minutes.

2. Remove the dirt from surfaces with the high pressure

lance or chosen accessory. Again, clean from bottom
to top on vertical surfaces.

3. To fl ush away large quantities of dirt, change to low

pressure mode and use the higher fl ow to push away
the dirt.

4. Use recommended disinfectant products and methods

to ensure hygiene. Apply DES 3000 disinfectant once
the surfaces are perfectly clean.

Machinery
Tractors
ploughs etc.

Detergent injection
Powerspeed lances
Curved lances and un-
derchassis washers
Brushes

1. Apply detergent to vehicle or equipment surfaces in

order to soften up dirt and grime. Apply from bottom
to top.

2. Proceed with cleaning using the high pressure lance.

Clean again from bottom to top. Use accessories to
clean in diffi cult to reach places.

3. Clean fragile areas such as motors, rubber at lower

pressure levels to avoid damage.

5.2.2 Vehicle

Task

Accessories

Method

Vehicle bodywork

Standard lance
Detergent injection
Curved lances and un-
derchassis washers
brushes

Detergents
Active Shampoo
Active Foam
Sapphire
Super Plus
Aktive Wax
Allosil
RimTop

1. Apply detergent to vehicle or equipment surfaces in

order to soften up dirt and grime. Apply from bottom
to top. In cases of particularly dirty vehicles, pre-spray
with a product such as Allosil in order to remove traces
of insects etc, then rinse at low pressure and apply
normal car cleaning detergent. Let detergents settle
for 5 minutes before cleaning off. Metallic surfaces can
be cleaned using RimTop.

2. Proceed with cleaning using the high pressure lance.

Clean again from bottom to top. Use accessories to
clean in diffi cult to reach places. Use brushes in order
to add a mechanical cleaning effect. Short lances can
help for cleaning of motors and wheel arches. Curved
lances or undercarriage washers can be valuable for
the cleaning of car underchassis and wheel arches.

3. Clean fragile areas such as motors, rubber at lower

pressure levels to avoid damage.

4. Apply a liquid wax using the pressure washer in order

to protect the bodywork from pollution.

Advertising