ROTHENBERGER ROWELD BS 450 - Handbuch (Seite 14)

12 ENGLISH
3. Intended use
The band saw machine type BS 450 is intended exclusively for the sawing of plastic tubes.
The intended use also includes reading this manual as well as adherence to all instructions
contained in it – in particular the safety instructions. Furthermore, it also includes that all
inspection and maintenance work is accomplished within the prescribed time intervals.
The permissible dimensions for the material to be processed, as well as the other technical
pecifications indicated in the section "Technical data" of this chapter, must be observed without
exception.
DANGER! If the band saw machine type BS 450 is not used in accordance with
this regulation, then no safe operation of the machine is ensured.
DANGER! For all damages to property and persons that result from not intended
use, not the manufacturer but the operator of the band saw is responsible.
4 Package, Transport
The machine is placed on a pallet base and wrapped with foil. For sea freight, the machine is
packed in a box.
Transport lock:
To avoid uncontrolled moving or swinging the saw arm in transport, the saw bow is secured to
the machine stand with a transport lock.
ATTENTION! By further transport of the saw, the saw bow is secured to the machine
stand with the transport lock!
Transport type:
Lift truck or elevating truck (Guide positons X see fig. A)
ATTENTION! Do not hung up the machine by the saw bow !
5. Overview A
1 Main switch 10 Connection vacuum cleaner
2 Switch board 11 Compensation spring
3 Saw bow 12 Main frame
4
Saw band deflection with protection
for smaller diameters
13
Start button (at the back side of the
hand grip)
5 Grip for band tensioning 14 Fixing screw
6 Grip to fix the band tensioning 15 Hand wheel
7 Table 16 Clamping prism
8 Motor cable 17 Fixing of the angle scale
9 Main motor 18 Angle scale
6. Technical Data
General data:
Machine L X W X H ...........................1200 X 1400 X 1800 mm
Weight..............................................160 kg
Saw band dimensions........................3590 X 10 X 0,65 mm
Diameter connecting piece ................Outer 76 mm, Inner 65 mm