ROTHENBERGER ROWELD BS 450 - Handbuch (Seite 15)

ENGLISH 13
Max. pipe diameter ...........................450 mm
Electrical data:
Voltage .............................................3N-PE-AC 400V
Nominal current ................................2 A
Fuse (supply line) ...............................max. 16 A
Lenght of cable connection ...............3000 mm
Motor ...............................................1,25 kW, 50 / 60 Hz
Saw band:
Dimensions .......................................3570 X 10 X 0,6 mm
Quality ..............................................Fusion cut
7. Safety precautions
Safety devices are prescribed for the protection of the operator of the band saw machine and
must not be removed under any circumstances while the machine is in operation.
The sawing machine is intended exclusively for sawing plastics!
 Carefully read the operating instructions and make you acquainted with the security,
assembly, operating, and service instructions.
 Do not switch on the machine before all protection devices are in place.
 Measurements at the material to be sawed must only be performed when the saw is switched
off.
 Prior to any maintenance or repair work, the sawing machine must be electrically separated
from mains.
 Repairs may only be performed by a specialist.
 For your own security and to ensure that the machine works perfectly, only original spare
parts should be used.
 Clean the machine regularly!
 Wear eye protectors during all kind of work at the machine!
 Wear gloves when changing the saw band!
Do not install the Machine in the open.
8. Start up
8.1 Installation
 Install the band saw machine on a flat machine foundation.
 Adjust with the special spirit level for machines in both directions the main frame of the
machine.
Mode of transport: Lift truck or elevating truck (Attachment points X see fig. A)
Use to prevent damage in transit only one with sufficient funding capacity (min. 500 kg).
Machine only in dry areas, set up for indoor use!
Connect the machine to suction!