ROTHENBERGER ROWELD BS 630 Plus - Handbuch (Seite 16)

14 ENGLISH
With these screws, the slope
of the tension wheel can be
adjusted so that the saw
band is running correct in
the guarding system.
8.4 Changing the saw band
 Wear working gloves and protective goggles.
 Switch off the machine, main switch off.
 Remove wheel covers.
 Release rolllock by star-handle (6).
 Release the band tension by turning the star-handle (5) to the left.
 Pull the band out of the deflection facilities and remove.
 Install new blade, teeth pointing towards the front and in the cutting direction.
 Introduce saw band into saw band deflection, and apply tension by turning the star handle
right until the pointer on the backside is of the MAX - marking.
 Check proper fit of the saw band by turning the wheels by hand in cutting direction.
 Re-attach wheel covers and saw band covers.
DANGER! When rotating new saw bands apart, there is a risk that they might
jump open and cause injuries, particularly to the face!
6 5