WIKA CTH6200 - Handbuch (Seite 16)

WIKA Betriebsanleitung Hand-Held Thermometer
2146872 09/2004 GB/D
16
GB
WIKA Operating Instructions Hand-Held Thermometer
Hand-Held Thermometer
CTH 6200
If logger memory contains recordings already:
When key:
´Store/Quit´ is pressed for 2 seconds, the choice for
clearing the logger memory will be displayed:
clear clear nothing
all recordings (cancel menu)
clear the last
recording
The selection can be made by key: ´Min´ and key: ´Max´. Key:
´Store/Quit´ enters the choice.
If the logger memory is full, the display will show:
Viewing Recorded Measurings
Within the "LoGG Stor" function the measurings can be viewed
directly in the display not only by means of a computer (like at
"Func CYCL"): press 2 seconds ´Set/Menu´. The first menu
displayed now is "rEAd LoGG" (read logger data). After pressing
key: ´Tara´ the measurement recorded last will be displayed,
changing between the different values referring to the measure-
ment also is done by pressing key: ´ Tara´.
Changing the measurement is done by pressing the key: ´Min´ or
key: ´Max´.
3.2 Func-CYCL": Automatic recording with selectable cycle-time
The Logger-Cycle-Time is setable (p.r.t. Configuration). For
example "CYCL" = 60: A measuring is recorded after each 60
seconds.
Max. number of measurings: 16384
Cycle time:
0:01 ... 30:00 (minutes: seconds, min 1 s,
max 1 h), selectable in the configuration
A measuring contains:
■ Current measuring value at time of recording