What to do if – AEG S71440TSW0 Benutzerhandbuch

Seite 13

Advertising
background image

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the

food inside from spoiling in case of a power failure.

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not

in this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem

Possible cause

Solution

The appliance is noisy

The appliance is not supported

properly

Check if the appliance stands sta-

ble (all the four feet should be

on the floor)

The appliance does not op-

erate. The lamp does not

operate.

The appliance is switched off.

Switch on the appliance.

The mains plug is not connec-

ted to the mains socket correct-

ly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates

continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open lon-

ger than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

Water flows on the rear

plate of the refrigerator.

During the automatic defrost-

ing process, frost defrosts on

the rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged.

Clean the water outlet.

What to do if…

13

Advertising