AEG S71440TSW0 - Handbuch (Seite 16)

Location
The appliance should be installed well away
from sources of heat such as radiators, boilers, di-
rect sunlight etc. Ensure that air can circulate
freely around the back of the cabinet.To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally, how-
ever, the appliance should not be positioned be-
low overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at the
base of the cabinet. If the cabinet is placed in a
corner and the side with the hinges facing the wall, the distance between the wall and
the cabinet must be at least 10 mm to allow the door to open enough so that the
shelves can be removed.
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Installing under a continuous worktop
If your refrigerator is installed under a continu-
ous worktop, an air outlet opening of at least
200cm
2 and a ventilation grille matching the
worktop design should be installed at the rear of
the worktop.
The cut surfaces of the worktop should be var-
nished to avoid swelling due to penetration of
moisture.
The appliance wall distance must be at least 30
mm and should be checked before the ventila-
tion grille is inserted.
15mm 15mm
100mm
500/550/600
105
570
550 93-103
2
200 cm
820 min
A
16 Installation