AEG 40095VD-MN Benutzerhandbuch

Seite 35

Advertising
background image

Problem

Possible cause

Remedy

The appliance does not
operate

The fuse in the fuse box
is released

Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.

The appliance does not
operate

The power plug is not
correctly put in

Put in the power plug
correctly

The appliance does not
operate

The earth fault switch is
switched off

Switch on the earth fault
switch

The appliance does not
operate

The Child safety device
or Lock operates

Refer to "Hob - Daily
Use" chapter.

The appliance does not
operate

The appliance is not acti-
vated

Activate the appliance

The appliance does not
operate

The clock is not set

Set the clock

The appliance does not
operate

The "Automatic switch-
off" is on

Refer to “Automatic
switch-off”

The food boils or fries
too slowly

The cookware is not cor-
rect for the heat conduc-
tivity

Use correct cookware
with good heat conduc-
tivity

The signal clock does
not work

The time is not set

Set a time

The oven does not heat
up

The necessary settings
are not set

Control the settings

The oven lamp does not
operate

The oven lamp is defec-
tive

Replace the oven lamp

The core temperature
sensor does not work

The core temperature
sensor is not correctly
put into the core tem-
perature sensor socket

Remove the core tem-
perature sensor and put
it in the core tempera-
ture sensor socket again.
Set the necessary tem-
perature

The oven display shows
"F11"

The core temperature
sensor is not correctly
put into the core tem-
perature sensor socket

Put the core temperature
sensor correctly into the
core temperature sensor
socket

The display shows an er-
ror code that is not in
this list

There is an electronic
fault

• Deactivate the appli-

ance with the house
fuse or the safety
switch in the fuse box
and activate it again

• If the display shows

the error code again,
refer to the Customer
Care Department

ENGLISH

35

Advertising