Blomberg TKF 7230 - Handbuch (Seite 17)

16 - EN
To start a new program after the program
is over or to interrupt the program, the
childproof lock should be deactivated. To
deactivate the childproof lock, press the
same buttons for 2 sec. The “Childproof
lock” will be deactivated and the warning
light will go off.
Ending the program through
canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new program
can be selected and started after “Program
cancel” is activated in order to change the
drying program.
To cancel any selected program;
•
Press “Start/Pause/Cancel” button for
about a duration of 4 seconds. The “Filter
cleaning”, “End/ Anti-creasing” warning
lights will light up at the end of this period
for reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool it
down.
End of program
The “End/Anti-creasing” lamp and the “Filter
cleaning” warning led on the program follow
up indicator will light up when the program
comes to an end. The door can be opened
and the machine becomes ready for a
second cycle.
Press the “On/Off” button to shut down the
machine.
C
A 2-hour anti creasing program to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the program has come to an
end.
C
Clean the filter after each drying (please
see, Filter cleaning).