Instruction manual gb, Replacing the interior light bulb, Cleaning and care – Blomberg SSM 1551 X Benutzerhandbuch

Seite 12

Advertising
background image

Instruction Manual

GB

6

Replacing the interior

light bulb

Should the light fail, switch off at the socket

outlet and pull out the mains plug.

Then ensure the bulb is screwed securely in the

bulb holder. Replace the plug and switch on.

If the light still fails, obtain a replacement E14

screw-cap type 15 Watt (Max) bulb from your

local electrical store and then fit it
(Fig. 5)

.Carefully dispose of the burnt-out light

bulb immediately.

Cleaning and care

1.

We recommend that you switch off the

appliance at the socket outlet and pull out the

mains plug before cleaning.
2.

Never use any sharp instruments or abrasive

substances, soap, household cleaner, detergent

or wax polish for cleaning.
3.

Use luke warm water to clean the cabinet

of the appliance and wipe it dry.
4.

Use a damp cloth wrung out in a solution

of one teaspoon of bicarbonate of soda to one

pint of water to clean the interior and wipe it

dry.
5.

Make sure that no water enters the

temperature control box.
6.

If the appliance is not going to be used for

a long period of time, switch it off, remove all

food, clean it and leave the door ajar.
7.

We recommend that you polish the metal

parts of the product (i.e. door exterior, cabinet

sides) with a silicone wax (car polish) to protect

the high quality paint finish.
8.

Any dust that gathers on the condenser,

which is located at the back of the appliance,

should be removed once a year with a vacuum

cleaner.
9.

Check door seals regularly to ensure they

are clean and free from food particles.
10.

Never:

Clean the appliance with unsuitable material;

eg petroleum based products.

Subject it to high temperatures in any way,

Scour, rub etc., with abrasive material.

11.

Removal of dairy cover and door tray :

To remove the dairy cover, first lift the cover

up by about an inch and pull it off from the

side where there is an opening on the cover.

To remove a door tray, remove all the contents

and then simply push the door tray upwards

from the base.
12.

Make sure that the special plastic container

at the back of the appliance which collects

defrost water is clean at all times. If you want

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: