Clearaudio EMOTION SE - Handbuch (Seite 7)

Emotion SE
User manual / Bedienungsanleitung
Page / Seite 6  Clearaudio electronic GmbH 2013
3. Installation and set up
The set up and installation of the Emotion SE is done quickly and very easy.
Please use the white gloves during this procedure, to avoid scratches.
1.)
You should consider a safe and clean working area for the installation, as near as possible to
the final position of the Emotion SE -turntable.
First take out the motor and tonearm of the packing. Now you should take out the first
packing layer. After that you can take out the Emotion SE - turntable chassis from the next
packing layer. Place the turntable body on a clean underlay.
To avoid any damages to your bearing, the turntable platter should achieve room
temperature before the set up begin (approx. 20 ° Celsius).
2.)
Take the upper bearing part and place it on the lower bearing part, which is already
integrated in the chassis (picture 2).
3.)
Place the platter with both hands carefully onto the bearing.
Through a lightly (!!) up and down movement the platter will slip onto the bearing upper
part (picture 3).
Avoid major side force to prevent any damages to the ceramic bearing!
Make sure with gentle pressure that the platter is applying on the complete surface of the
bearing.
Pic. 3: Set up of the platter
Pic. 2: Placing the bearing
Pic. 3: Placing the platter