Clearaudio EMOTION BLUE (BLUEMOTION) - Handbuch (Seite 22)

Bluemotion mit Satisfy
Bedienungsanleitung
Seite 22  clearaudio electronic GmbH 2006
Now you are ready for the antiskating adjustment. This also depends on the tracking force of
the cartridge and the diamond shape.
alignment of the antiskating tracking force position of the antiskating-screw
minimal antiskating 10 – 15mN see illustration 1
medium antiskating 15 – 20mN see illustration 2
maximum antiskating 20mN and more see illustration 3
Illustration 1 Illustration 2 Illustration 3
(minimal Antiskating) (medium Antiskating) (maximum Antiskating)
The general set-up is now finished.
Connect your
Satisfy -tonearm now with the phono input of your phono-preamplifier.
(More information on adequate phono-preamplifiers and interconnects you can find on our
Website
www.clearaudio.com ).
Place one drive belt (the second is for spare) around the platter and
around the pulley.
The smaller diameter of the pulley is used for 33 1/3 rpm and the larger
diameter for 45 rpm. The position „I” on the motor-switch indicates that
the turntable is switched on. Please let the turntable be switched on for
the first 15 to 30 minutes, for breaking in.
Now you are finally ready to play your vinyl records.
We wish you a lot of pleasure with your new
Bluemotion -turntable.
Your
clearaudio-team