Clearaudio SMART SYNCHRO - Handbuch (Seite 2)

Smart Synchro
Power Generator
User manual / Bedienungsanleitung
Seite/Page 2  clearaudio electronic GmbH 2014
User manual 2 - 4
Bedienungsanleitung 5 - 7
Dear Clearaudio customer,
thank you for your decision to purchase the world class Clearaudio Smart Synchro Power Generator.
Please take a moment to read this user manual to avoid any possible damage, to ensure correct
setting up and to learn how proper care of your Smart Synchro Power Generator can give you many
years of enjoyment.
The Clearaudio Smart Synchro will, like its outrider Synchro (SPG), improve the sound quality of all
high end audio systems. You will immediately notice a larger, more stable and transparent sound
stage.
It simply improves the sound of your systems components better by eliminating any distortion and
voltage or frequency fluctuations.
The new Smart Synchro is designed to fit under the Clearaudio turntables like Emotion and
Emotion SE and is only suitable for Clearaudio synchronous motor (e.g. also for Performance and
Performance SE)
If you have any further questions concerning the Clearaudio Smart Synchro or other products made
by Clearaudio please contact your local distributor or directly Clearaudio.
Clearaudio electronic GmbH
1. Introduction
Most AC power lines contain unusually high amounts of noise and fluctuations of voltage and
frequency. They may also contain distortion of up to 10 %. Standard power supplies cannot eliminate
all this noise and distortion. Some power line filters can help, but can do nothing about fluctuating
voltage or frequency. Clearaudio's Smart Synchro will eliminate all these problems and will actually
improve the sound quality of your system, thus taking it to a new level of realism.
The Clearaudio
Synchro Power Generator combines two units in one housing:
 Distortion free AC power with constant line voltage 230V~ or 115V~
 Constant frequency generator variable between e.g. 47 to 89 Hz
On the front panel (left button), you will notice a switch botton marked with 33 rpm and 45 rpm.
While channel 1 can be set to a fixed working frequency of 50 Hz (33 rpm), channel 2 can be set to
higher frequencies e.g. 67,5 Hz ( 45 rpm). The actual working frequency can be switched any time
during operation between 50 Hz and any 67,5 Hz or other frequency.
It is recommended to start in 33 1/3 switch position and than switch to 45 rpm.
Package Content:
The Clearaudio Smart Synchro Power Generator is delivered in a special packaging to ensure a safe
transport. Please store this original packaging in case of any transportation or shipping.
Please check the contents immediately after unpacking :

Clearaudio
Smart Synchro Power Generator

One (1) power supply unit

One (1) electrical connection cord

One (1) screw driver for fine adjustment

User manual

Warranty card

Clearaudio Quality Card