Smart synchro, Technical specifications, Power generator – Clearaudio SMART SYNCHRO Benutzerhandbuch

Seite 4

Advertising
background image

Smart Synchro

Power Generator


User manual / Bedienungsanleitung

Seite/Page 4

clearaudio electronic GmbH 2014

4. The Clearaudio

Smart Synchro

allows you also to set and maintain an exact speed by using the

delivered screw driver.
For this fine adjustment you have to turn the integrated potentiometer screws in the middle of the

front panel (left for 33 1/3 RPM and right for 45 RPM)

5. We recommend to have enough lightness for this adjustment.
Insert the screw driver into the small pre-drilled fitting in the middle of the front panel (left side for 33

1/3 RPM and right side 45 RPM) until you feel a variable resistance.
Turn slowly and carefully the integrated potentiometer screw until you have the correct speed
adjustment:

Clockwise = frequency rises up

Counter-clockwise = frequency falls


6. For this fine adjustment of the correct speed Clearaudio recommends the Clearaudio
Stroboscope Test Record (AC038) and the Clearaudio 300 Hz Speed light (Set with Record: AC076),

available under:

www.analogshop.de

!

Attention:
If the Smart Synchro is not in use for an extended period, switch it off at the ON/OFF
bottom.


Clearaudio wishes you a lot of pleasure with your new power generator

Smart Synchro

!


3. Technical specifications

Mains voltage:

115 / 230 V – 50 / 60 Hz
(please specify version)

Fuse:

at 115 V / T 0,25 A

at 230 V / T 0,125 A

Output voltage:

115 V or 230 V

(please specify version)

Output frequency:

approx. 47 – 89 Hz

Maximum output power:

max. 3 W

Power consumption:

Max. consumption:
Consumption in operation:

Off mode:

21 Watt
20 Watt
0 Watt

Output:

electrical connection

Dimensions ( W x D x H in inch):

Dimensions ( W x D x H in mm):

approx. 3.94 x 5.39 x 1.38 inch

approx. 100 x 137 x 35 mm

Weight (only Smart Synchro):

570 gram

Warranty*:

3 Years *

*Only if the warranty registration card is correctly filled out by the owner and sent back to Clearaudio within the stated time.



Clearaudio electronic is not responsible for typographical errors in descriptions. Technical

specifications subject to change or improvement without prior notice. Availability as long as stock
lasts. Copies and imprints- also only in extracts – require written conformation through Clearaudio

electronic GmbH; Germany

Stand: August 2014

Advertising