General information, 1 safety instructions – Baumer ASMIR Benutzerhandbuch

Seite 10

Advertising
background image

ASMIR

10

www.baumer.com

ASMIR

10

General Information

In the following you will find the explanations of the symbols used in this

operating manual.

Explanation of symbols ➜ This symbol indicates activities to be carried out.

This symbol indicates supplementary technical information.

This symbol is located before text to which particular attention is to be paid to

ensure proper use of the product.

This symbol is located before text that provides important additional informa-

tion.

1 Safety instructions

General information

The product has been developed and built in accordance with the

recognized rules of technology. The units have left the manufacturing plant

ready to operate and in safe condition!

To keep the units in this condition, it is necessary that the units are

-installed and operated

-properly,

-in a safety and hazard-conscious manner, under observance of this opera-

ting manual and in particular of these safety precautions!

Make sure that the personnel has read and understood the operating manual,

and in particular the „Safety Instructions“ chapter.

In addition to the operating manual, the generally applicable legal and other

binding regulations for accident prevention and environmental protection

must be observed and ensured.

This manual is intended as a supplement to already existing documentation

(catalogues, data sheets or assembly instructions).

Intended purpose of the power tool

The power tool is intended as hand-guided actuator that communicates by in-

frared interface with the position displays mounted on the positioning shafts.

The maximum admissible torque must not be exceeded (see technical speci-

fications).

The device must only be operated

-in the properly installed state and

-in accordance with the specifications of the technical data.

Operation outside the limit values/parameters is improper use of the power

tool and in conjunction with control/monitoring appliances/machines/pro-

cesses might occur

- fatal personal injuries,

- serious damages to health,

- material damage or

- damage to the device!

Advertising