Baumer BA ZADM023 - Handbuch (Seite 60)

Seite / Page 60
6.2 Reflective tape covered by
plexiglass
If the reflective tape is covered by
glass or plexiglass, the reflector must
be tilted, because a reflection from
the reflector may disturb the meas-
urement. The angle is approximately
5°.
Attention: The reflector must be tilted
as shown in the drawing.
6.3 Glossy objects
If very glossy objects must be meas-
ured, a reflection from the object may
disturb the measurement. In this case
it helps to tilt the object. The reflection
will thus be reflected away from the
sensor.
Attention: The object must be tilted in
the axis shown in the drawing.
measuring range 30 mm:
approximately 7°
measuring range
≥
150 mm:
approximately 3°