Pilz PSENme 4A - Handbuch (Seite 8)

Installation and Operating Instructions
Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU-Conformity
Approvals TÜV Rheinland, Type Approved
C
CSA
US
A300 for PSEN me4,
PSEN me4.01, PSEN me4.1, PSEN me4.11
C
CSA
US
B300 for PSEN me4.2, PSEN me4.21
Start-up
Mechanical function test:
Actuate the safety guard und check the proper switching function.
Electrical function test in the safety control circuit:
- Opening the safety guard shall break off the energy of the drive.
- The drive shall only be energized when the safety guard is in its closed position.
Maintenance / Inspection
The switching device is maintenance-free. For trouble-free operation and a long service life the device should be
inspected regularly. Ensure that:
- all components are secure and tight
- switching functions operate properly
- all sealing gaskets are in proper condition
- the components show no signs of tear and wear.
If defects are detected the complete switching device and the actuator have to be replaced.
Liability disclaimer
By breach of the given instructions (concerning the intended use, the safety instructions, the installation and
connection through qualified personnel and the testing of the safety function) any liability expires.
EC Declaration of Conformity
This (these) product(s) comply with the requirements of Directive 2006/42/EC of the European Parliament and the
Council on machinery.
The complete EC Declaration of Conformity is available on the Internet at www.pilz.com
Authorised representative: Norbert Fröhlich, Pilz GmbH & Co. KG, Felix-Wankel-Str.2, 73760 Ostfildern, Germany
Date of issue: 15.04.2014 / Page 8 of 8
1003289-2EN-03 / Document: 0800000424 / Version: 3 / 2220-14
Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-Straße 2, D-73760 Ostfildern, Deutschland
Phone: +49 711 3409-0, Fax: +49 711 3409-133, E-Mail: [email protected], www.pilz.com
Template : 0850174292 Orig. 2