Commissioning and power supply 3 – ALTANA Wave-Scan ROBOTIC Benutzerhandbuch
Seite 10
Advertising
9
English
Commissioning and power supply
3
D1
D2
Power supply:
The instrument is supplied by an
external AC power adapter.
Power supply and data transmission
are combined in a 9-pole sub D plug.
In order to connect the measuring
instrument, first check the wiring and
the matching of the power supply.
Subsequently you plug in the sub D
plug (arrow), and switch on power.
The light-emitting-diode D1 signals the
connected power supply.
The light-emitting-diode D2 blinks
green during the measurement.
If a mistake should happen during the
measurement, it is signalled by a red
blinking light-emitting-diode D2. The
pertinent error code is shown at the
screen.
Advertising