The easy-link bykware software, Attention – ALTANA Temp-Gard Basic Benutzerhandbuch
Seite 38
temp-gard basic Hardware
17
The easy-link BYKWARE Software
Installation
For system requirements please see back side of compact disk cover.
•
Put the easy-link CD into the CD-drive.
• Activate the Windows@ Explorer.
•
Choose the drive containing the software.
• Start
set-up.
• Follow
the
instructions of the installation program.
•
Remove CD when th einstallation is completed.
•
Look for the Excel file
TempGardLink (BYKWARE, temp-gard link) and open it with
the
Activate Macros key.
•
Select language amd temperature in
Configure ComPort.
Preparing a measurement with easy link
Attention
The SRAM-card must always remain in the temp-gard basic instrument as a sacing
medium!
•
Connect the connecting cord (9 pin) to the computer and the temp-gard basic
instrument.
• Open
the
Change Card menu.
•
Set up the temperature range, sampling interval, trigger, number of probes and
duration.
•
Remove the connecting cord and execute measurement as described in Handling the
temp-gard basic System on page 13.
Reading the Data Values
• After
finishing the measurment, reconnect the temp-gard basic instrument to your
PC.
• Press
the
Load Data key in the temp-gard link software.
•
The data values will be read into the columns from A to XX.
•
Save data values under the new name with the command
Save under in the File
menu.
You can now use all Excel function for your analysis!
!