AEG VAMPYRETTE 315 - Handbuch (Seite 7)

Fig. 5/B: Before switching on your vacuum
cleaner, preprogramme the power economy
button E. The power economy button ensures
that your vacuum cleaner has the right degree
of suction for normal everyday cleaning tasks.
Should, however, more intensive vacuum
cleaning be required (removing heavy dirt
stains, working on smooth floors, etc.), the
degree of suction can be increased to 750 W.
In exactly the same manner, the suction power
can also be reduced to 250 W (for delicate
fabrics, light carpets, etc.).
It should basically be noted that the highest
suction power setting will give the best
cleaning results. With increasing wattage,
however, the power consumption also
increases together with the effort required to
push the nozzles and the operating noise of
the vacuum cleaner.
All buttons can be pressed or preprogrammed
in any arbitrary sequence.
Filter change
The filter change (bag full) indicator (fig. 1/J)
tells you that the filters must be changed.
You should then check as follows:
Switch on vacuum cleaner and set to 750 W.
Fig. 8: Please note: after every fifth dustbag
change, the MJCROFILTER must also be
replaced to ensure proper suction power.
Through timely replacement, you will ensure
optimum suction power and save yourself
work.
Fig. 9: Insert the lid into the appliance and
press it firmly closed.
VARIO 1500 easy-glide nozzle with
up-tO'the-edge cleaning (fig. 10)
It additionally features a pivot that makes your
hand vacuum cleaner especially mobile.
Working under furniture is eased by lateral
rotation of the appliance.
Fig. 11: When the nozzle is inserted with rota­
tion through 180°, the VAMPYRETTE needs a
working height of only 19 cm.
You can convert the VARIO 1500 easy-glide
nozzle from carpet to hard floor via only one
foot-operated button.
Foot-operated button switched forward =
carpeted floor.
Foot-operated button switched backward =
hard floor.
If a red symbol in the inspection window
shows red, the dustbag or also the
MICROFILTER must be changed.
Please use original AEG dustbags or
MICROFILTERS provided with the
quality seal. This will ensure
high suction power and reliability.
Replacement filters (size 20) are available from
your stockist under E-No. 618 899 679 and
from the AEG After-Sales Service under
ET-No. 668 901 257. Damage resulting from
use of other dustbags will not be covered by
guarantee. Every pack of original AEG paper
filters contains: 10 dustbags and
2 MICROFILTERS.
Changing the filters (fig. 6)
Open the dust compartment lid by depressing
the snapaction catch and remove the lid.
Fig. 12: The thread collectors are wearing
parts. By replacing them promptly, you will
ensure effective pickup of threads and fluff.
To be ordered via the AEG After-Sales Service
under ET-No. 668 900 707.
ROTOSOFT 2000 H/F
electrosuction brush
(fig. 13)
(Special accessory, E-No. 618110 201)
Colour: medium grey
This is the ideal accessory for cleaning large
areas of carpeting quickly and thoroughly.
Fluff and threads are no problem for this
appliance, which will gently brush and vacuum
your carpet in a single operation.
The device is fitted to the socket outlet of your
hand vacuum cleaner.
When working with ROTOSOFT 2000, do not
run over the vacuum cleaner flex!
Fig. 7: The lid can be used to carry the full
dustbag. Take out the full dustbag and fit the
new dustbag on the dustbag carrier.