Clearaudio Master TQ-I (Tangential) - Handbuch (Seite 14)

Master-TQ-I
Bedienungsanleitung
User manual
Seite / Page 14
 clearaudio electronic GmbH 2015
5. Special Instructions / Service
Please take the time to fill out the enclosed warranty card and return it to Clearaudio or your local
distributor / dealer. If you do not return this card within 14 days after purchase the
guarantee will only be for the law regulated guarantee time periode
During any transportation of the tonearm, always fix the carriage with a piece of e.g. foam so that the
carriage is not able to move during transportation and use the original packaging. If there is any
damage to any parts of the tonearm that could influence exact tracking, please contact your local
dealer, distributor or clearaudio.
Use only special acrylic cleaner, which is not alcohol based to clean the acrylic parts of the tonearm.
Otherwise you could could damage the material (haircracks and spots on the acrylic
surface).
 Never put oil or any similar liquids on the quartz rods or into the precision bearings
!
 Never move or readjust the screws in the carriage of the tonearm. They are to be
adjusted only by qualified dealers or at the clearaudio factory.
 Keep your Master TQ-I tonearm out of extreme temperature and extreme moisture
environments.
 The tonearm dust cover should be left on the arm during normal operation. Always
replace after making any adjustments or cleaning procedures.
clearaudio electronic GmbH,
Spardorfer Strasse. 150,
D-91054 Erlangen
Germany
Phone : +49-(0) 9131/40 300 100
E-mail: [email protected]
www.analogshop.de
Web: www.clearaudio.de