Dynaudio Evidence - Handbuch (Seite 5)

Dynaudio Evidence 5
Unpacking the Loudspeakers
Unpacking the Loudspeakers
Dynaudio Evidence models are protected during transit by stable and secure packaging.
Due to their weight and dimensions, they are shipped in a special wooden crate.
To unpack the Evidence Master loudspeakers:
X Please consult your Dynaudio dealer.
To unpack the Temptation and Center models:
1. Lay the transport box flat on the floor.
2. Remove the screws along the top plate, the top plate and the five safety pads.
3. Remove the screws along the bottom plate.
4. Carefully lift the sidewall frame.
5. Carefully remove the loudspeaker by lifting it up horizontally.
6. Turn the loudspeaker and slowly place it on its plinth.
7. Remove the wrapping foil by lifting it on one end and unwrap it in a clock-wise motion.
Do not use blades, cutters or any other sharp objects that will destroy the foil.
8. Fix the sidewall frame on the bottom plate again.
9. Place the wrapping and the safety pads back into the box and close the plate.
The wooden transport crates and custom cartons are intended for long-term use and
should be used whenever the loudspeakers are to be transported, and as such they
should be stored for future use.
CAUTION HEAVY PARTS
Unpacking the Evidence loudspeakers without help may cause
personal injuries or product damage.
X Consult your trained Dynaudio dealer for assistance.
X Two people are recommended to unpack the loudspeakers.
Fig. 1 Packaging (Temptation and Center models only,
figure shows Temptation).
Evidence.book Seite 5 Montag, 12. Januar 2009 2:04 14