Beurer PM 200+ - Handbuch (Seite 19)

19
If the pulse connection fails to function, reverse the
polarity of the headphone connection as follows.
Windows Phone 7:
Go to “Settings” and select “Heart Rate Settings”.
Set “runtastic Receiver (5.3 kHz)” to ON.
If the pulse connection fails to function, reverse the
polarity of the headphone connection as follows.
After use, disconnect the receiver from the smart-
phone in order to preserve the battery life of the
smartphone.
NOTE
1. If no heart rate dis-
play appears, open
the receiver housing
carefully (as detailed
under “Replacing the
receiver battery”), and
reverse the switch in the housing. Close the hou-
sing and repeat the pulse connection as detailed
under “Activating pulse measurement”.
Alternatively, the music volume may be so high
that it is interfering with the pulse signals. Redu-
ce the music volume.
2. The microphone and speaker are deactiva-
ted when the receiver is connected to the
telephone, but you can continue to use head-
phones.
3. The remote control on the iPhone headphones
does not function when the receiver is con-
nected to the telephone.
4. The receiver is switched on and consumes bat-
tery power as soon as it is connected to the te-
lephone, even if the runtastic app is not active.
Remember to disconnect the receiver when it is
not needed.
5. The service life of the receiver battery is approx.
2 years when used for 1 hour per day. If trans-
mission between the receiver and the chest
strap ceases to function, replace the battery as
detailed under “Replacing the receiver battery”
or “Replacing the chest strap battery”.
A
B