English, Optical cable (not supplied), Audio dvd – Denon DVD-700 Benutzerhandbuch

Seite 13

Advertising
background image

– 13 –

EN

English

Connection to an audio system

Stereo system

Optical cable (not supplied)

• The optical cable (not supplied) may be damaged if bent at sharp angles. Ensure cables are coiled in loops with a diame-

ter of 15 cm or more when storing them.

• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

NOTES

• If Dolby Digital audio will be output, connect to a Dolby Digital decoder, and set Dolby Digital audio output to on in the setup

mode. (See page 25)

• If DTS audio will be output, connect to a DTS decoder, and set DTS audio output to ON in the setup mode. (See page 25)
• If output MPEG audio, connect to a MPEG decoder, and set MPEG to ON for audio output in the setup mode. (See page 25)
• Unless connected to a Dolby Digital decoder, a DTS decoder or an MPEG decoder, set Dolby Digital, DTS and MPEG to off for

audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage
the speakers. (See page 25)

• The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD

or DAT deck.

• Set Dolby Digital, DTS and MPEG to OFF for audio output in the setup mode for method 1 only. Playing a DVD using incorrect

settings may generate noise distortion, and may also damage the speakers. (Refer to page 25 to set ON for Dolby Digital, DTS
and MPEG)

AUDIO

DVD

Audio Input Jacks

Digital Audio Input
Jacks

Analogue Audio Out

Digital Audio Out

• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder

Dolby Digital decoder,

DTS decoder or

MPEG decoder

Method 1

Method 2

CONNECTIONS

The following show examples of connections commonly used to connect the DVD player to a TV and other
components.

Notes

¡Be sure to switch off the power to all components in the system before connecting another component.

¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the

DVD player.

E57E2/E5/E7_UK.QX33 03.5.21 13:24 Page 13

Advertising