Fronius SolarWeb - Handbuch (Seite 19)

7
EN-US
Settings for
Sending Data via
„FRONIUS
IG.access“
(continued)
NOTE! A proper setup of the photovoltaic system in the portal requires the
correct ID number of the Datalogger. If the Datalogger ID number was entered
incorrectly, you can change it later on. To do this, proceed as follows:
1. In „SolarWeb“ open the „Administration“ - „PV System“ - „Edit PV System“ menu
2. Select the system and enter the correct data
Settings for
Sending Data via
a Message Mo-
dem 1. Start „FRONIUS IG.access“
2. Open the „Message Modem“ tab in
the „Settings“ - „General“ menu
3. Enter dial-up number
4. Enter user name
5. Enter password
6. Enter SMTP server address
7. Enter the address of the e-mail
account to be used to send the e-mail
via the Datalogger
8. Activate the „POP3 Login“ checkbox if
your provider requires a „POP3 Login“
9. Activate the „Internet portal“ checkbox
10. Enter the time when the data should
be sent (we recommend sending data
at night)
11. Enter the SolarWeb e-mail address
(„[email protected]“)
Fig. 6 FRONIUS IG.access - Settings - Data via
Message Modem
3. Correct the ID number in the „FRONIUS ID“ field