H3C Technologies H3C S5120 Series Switches - Handbuch (Seite 13)

8
WARNING Power Cord Set:
The power cord set must be approved for the country where it is used:
U.S.A. and
Canada
• The cord set must be UL approved and CSA certified
• The minimum specification for the flexible cord is:
• No. 18 AWG
• Type SV / SVT or SJ / SJT
• 3 conductor
• The cord set must have a rated current carrying
capacity of at least 10A.
• The attachment plug must be an earth-grounding type
with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A,
250V) configuration
United
Kingdom
• The supply plug must comply with BS1363 (3-pin, 13A)
and be fitted with a 13A fuse that complies with
BS1362
• The mains cord must <HAR> or <BASEC> marked and
be of type H03VVF3G1.0 (minimum)
Europe
Europa
• The supply plug must comply with CEE 7/7
(“SCHUKO”) The mains cord must <HAR> or
<BASEC> marked and be of type H03VVF3G1.0
(minimum)
• Der Stromversorgungsstecker muss CEE 7/7
(“SCHUKO”) entsprechen.
• Das Netzkabel muss mit <HAR> oder <BASEC>
gekennzeichnet werden und sein Typ muss von
H03VVF3G1.0 (Minimum) sein.
Denmark
• The supply plug must comply with section 107-2-D1,
standard DK2-1a or DK2-5a.
Switzerland • The supply plug must comply with SEV/ASE 1011.
中国
•
电源线组件必须通过
CCC 认证。
The appliance coupler (the connector to the unit and not the connector to
the wall plug) must have a configuration for mating with an EN 60320 /
IEC 320 appliance inlet.