EverFocus EKR-KB1 - Handbuch (Seite 83)

Page 81 MNNCEKRKB1_0439
6.10 JVC TK-C 675 Dome
6.10.1 Reference m aterial and documents
Dome JVC TK-C675
TK-C675 Programmer’s manual, version 1.00/Feb.1998
TK-C675/C675B Programmer’s manual (supplement), version 0.01/Dec.1998
JVC CCTV Serial Communication Protocol, Basic Protocol Reference, version 2, Jan.1998
6.10.2 Connection
6.10.2.1 Cable
White
Yellow
RS485A
RS485B
Rx +
Rx -
6.10.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
Protocol must be set as Multidrop/Simplex.
6.10.2.3 Keyboard set tings
During Keyboard setup, submenu  must be suitably set:




Baudrate is fixed (9600 baud).
6.10.3 Setup
Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
 ).
6.10.3.1 OSM setup
Connect the dome directly to the keyboard and a monitor to the dome video outlet

: start dome setup
The dome shows the menu on video; the keyboard shows the mode change on the display:




setup end
 corresponds to Set key shown in the dome instruction manual, to enter the submenu
 allows the exit from submenu