Parkside PNTS 1500 B2 - Handbuch (Seite 10)

10
GB IE CY
2. Fit the filter cover (11b) and turn it gen-
tly to lock it:
To lock the filter cover
To unlock the filter cover
Vacuuming fine dust:
While vacuuming fine dust, you
may find dirt accumulating faster
than usual. For this reason, we
recommend the use of a paper filter
bag for fine dust.
3. Fold the paper filter bag (12) up com-
pletely and turn it over the internal noz-
zle of the suction tube.
The sealing ring on the filter bag open-
ing must completely enclosed the arm
on the suction nozzle.
Wet vacuuming
For wet sucking or to suck up water, place
the foam filter (13) on the filter box on the
motor head (3).
To avoid tearing the foam filter (13):
- Use only a dry filter;
- Turn over the edge of the filter a little.
When the container is full, the suc-
tion opening is shut off by a float,
and suction is then cut off. Switch
the appliance off, remove the plug
from the socket and empty the con-
tainer (see Cleaning/maintenance).
If foam or liquid exits, switch off
the machine immediately.
Blowing
To use the blower function, screw the
vacuum hose (18) on to the nozzles on the
engine housing (3) (operation without the
use of filters).
Powertool vacuuming
The Powertool hose can be used for
the following:
• Cleaning hard-to-reach places or sensi-
tive equipment.
• Connecting powertools for vacuuming
dust off.
Place the thicker end of the powertool hose
(19) straight onto the vacuum hose (18)
and the other end onto the reduction adap-
tor (20) supplied. You can now fit vacuum
nozzles or an electrical tool.
The reduction adaptor also fits onto
the vacuum hose (dust vacuuming
without the powertool hose).
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Never hose the appliance
down with water. Never use
aggressive cleaning agents
or solvents. This could dam-
age the appliance.
• After use, empty the waste tank (
5). Opening the drain plug to allow the
vacuumed liquid to drain out ( 7).
• Clean the waste tank with a damp
cloth.